Stainless Steel Strap 50m Price in Kenya

The Stainless Steel Strap 50m is a heavy-duty banding material used to mount fibre optic, telecom and utility hardware onto concrete, wooden and steel poles.

A common fibre and telecom specification is approximately:

20mm Width × 0.7mm Thickness × 50m Roll

AISI 201 stainless-steel versions are widely available for outdoor fastening applications because they combine good mechanical strength with corrosion resistance. A current Kenyan AISI 201 listing specifies 20mm width, 0.7mm thickness and a 50m continuous roll. 

The strap is normally used together with a stainless-steel buckle and banding tool. The installer cuts the required length from the roll, wraps it around the pole, tensions it and locks it using the buckle.

Stainless Steel Strap 50m Specifications

A dedicated SS201 manufacturer also specifies 20 × 0.7mm × 50m for its stainless-steel banding product. 

What Is Stainless Steel Strap 50m?

Stainless-steel strap is supplied as a continuous metal band in a roll.

Instead of using a fixed clamp for every pole diameter, the technician cuts exactly the length required for each installation.

Typical process:

50m Strap Roll → Measure → Cut → Add Buckle → Wrap Pole → Tension → Lock

This makes stainless-steel banding useful where multiple pole diameters are encountered on the same fibre route.

Why Use a 50m Roll?

A 50-metre roll is particularly practical for contractors carrying out multiple installations.

Advantages include:

• Enough material for multiple poles

• Flexible cutting lengths

• Less material wastage

• Convenient bulk deployment

• Reduced need to carry many fixed-size clamps

• Suitable for different pole diameters

• Efficient for FTTH and ADSS projects

A manufacturer of SS201 strap specifically describes the band as being cut to the required length before a buckle is fitted and the band tensioned using a banding tool. 

20mm × 0.7mm × 50m Stainless Steel Strap

One of the most common configurations is:

This size is available from multiple suppliers and is also used in utility specifications for pole-mounted equipment. 

The 20mm width provides a substantial contact area while the 0.7mm thickness provides useful mechanical strength while remaining suitable for professional tensioning tools.

19mm × 0.7mm × 50m Stainless Steel Strap

Some ADSS and fibre suppliers describe their banding as:

19mm × 0.7mm × 50m

One current Kenyan supplier lists a 50m ADSS stainless-steel strap with this specification. 

The difference between 19mm and 20mm is often due to nominal metric versus approximately 3/4-inch sizing.

Always match the strap to the correct buckle and tool.

AISI 201 Stainless Steel Strap

AISI 201 is one of the commonly available stainless-steel grades used for this type of banding.

A current Kenyan product specifies:

• AISI 201 stainless steel

• 20mm width

• 0.7mm thickness

• 50m roll

• Approximately 600MPa tensile strength

• Bright finish

• Corrosion-resistant construction 

Exact strength can vary between manufacturers, so engineering-critical installations should use the supplied product datasheet.

Stainless Steel Strap for ADSS Fibre Installations

The strap is widely used in aerial ADSS fibre networks.

It can help mount:

• Universal Pole Brackets

• J-Hook Suspension Clamps

• Downlead Clamps

• Cable Storage Brackets

• Fibre closure brackets

• Pole mounting plates

• Other ADSS hardware

The strap normally secures the hardware to the pole rather than being tightened directly around the fibre cable.

Stainless Steel Strap for Universal Pole Brackets

Universal Pole Brackets frequently include slots for stainless-steel banding.

Typical arrangement:

Concrete Pole
↓
Stainless Steel Strap
↓
Universal Pole Bracket
↓
PA1500 / PA2000 Tension Clamp
↓
ADSS Cable

This allows the bracket to be mounted without necessarily drilling through the pole.

Stainless Steel Strap for J-Hook Suspension Clamps

A J-Hook suspension assembly may also be secured using appropriate pole banding.

Typical setup:

Pole → Stainless Steel Strap → J-Hook → ADSS Cable

This arrangement is commonly used at intermediate fibre poles.

Stainless Steel Strap for Downlead Clamps

Downlead clamps guide ADSS or fibre cables vertically down poles.

The stainless-steel strap secures the clamp firmly against the pole.

Typical setup:

Pole → Strap → Downlead Clamp → Fibre Cable

Stainless Steel Strap for Cable Storage Brackets

Galvanized cable storage brackets may also use stainless-steel straps for pole mounting.

These brackets store spare cable near fibre closures and jointing locations.

A typical jointing pole may therefore include:

ADSS Cable → Downlead Clamp → Storage Bracket → Fibre Closure

Watch Stainless Steel Strap 50m Video

https://youtu.be/7J-woISBNhk

The 50m stainless-steel roll is useful for contractors because the band can be cut according to the diameter of each pole rather than relying on fixed-size fastening systems. One roll can therefore be used across several poles and different hardware configurations.

For proper installation, the strap should normally be combined with a compatible stainless-steel buckle and banding tool. The tool provides controlled tension and helps secure the band firmly before the excess length is cut.

This makes stainless-steel strap particularly useful for large FTTH, ISP, ADSS and telecom pole-line projects, where contractors may need to install many J-Hooks, UPBs, downlead clamps and storage brackets.

How to Install Stainless Steel Strap 50m

1. Position the bracket or accessory on the pole.

2. Measure the required strap length.

3. Pull sufficient band from the 50m roll.

4. Add enough length for locking through the buckle.

5. Cut the strap.

6. Fit the stainless-steel buckle.

7. Wrap the strap around the pole.

8. Pass the free end through the buckle.

9. Insert the strap into the banding tool.

10. Apply controlled tension.

11. Lock the buckle.

12. Cut excess band.

13. Fold or secure the cut end.

14. Inspect the installation.

This general procedure is consistent with stainless-steel banding manufacturer guidance. 

Stainless Steel Buckles

The buckle provides the locking point for the strap.

The correct buckle should match:

• Strap width

• Strap thickness

• Stainless-steel type

• Mechanical load

• Installation tool

For a 20mm strap, use a buckle intended for approximately 20mm banding.

Stainless Steel Banding Tool

A professional banding tool is used to:

• Grip the band

• Pull the strap tight

• Maintain tension

• Assist in locking

• Cut the excess band

Utility specifications similarly call for a dedicated manually operated strap-binding tool for installing stainless band on poles. 

Stainless Steel Strap and Buckle System

Why Stainless Steel Is Suitable Outdoors

Pole-line hardware may be exposed continuously to:

• Rain

• Humidity

• Temperature variations

• Wind

• Dust

• UV exposure

• Pollution

Stainless steel provides corrosion resistance and strong mechanical performance for these environments. Current Kenyan products specifically market these 50m straps for outdoor fastening and cable-management applications. 

Stainless Steel Strap 50m for Concrete Poles

Concrete utility poles are one of the main applications.

Banding can provide:

• Fast installation

• No drilling in compatible installations

• Adjustable mounting

• Compatibility with varying pole diameters

• Strong hardware attachment

Stainless Steel Strap 50m for Wooden Poles

The band can also be installed around wooden poles where permitted by the project design.

Wooden poles may alternatively use:

• Bolts

• Screws

• Hook bolts

• Specialized brackets

The correct method depends on the installed accessory.

Stainless Steel Strap 50m for Steel Poles

Steel poles often work particularly well with banded hardware because straps can avoid:

• Welding

• Drilling

• Permanent pole modifications

The hardware can also be repositioned more easily during installation.

Stainless Steel Strap 50m for Towers

The strap can also be used on compatible:

• Telecom towers

• Masts

• Support frames

• Structural members

The exact banding method should match the equipment manufacturer and structural requirements.

50m vs 30m Stainless Steel Strap

For repeated pole installations, the 50m roll is normally more convenient.

20mm × 0.7mm vs 20mm × 0.4mm

Stainless banding is available in different thicknesses.

Telecom hardware manufacturer documentation lists both 20 × 0.4mm and 20 × 0.7mm stainless-steel straps in 50m rolls. 

Stainless Steel Strap vs Nylon Cable Ties

Plastic cable ties should not replace engineered stainless-steel banding for heavy pole hardware.

AISI 201 vs AISI 304 Stainless Steel Strap

AISI 201 is widely used for standard outdoor fastening, while higher corrosion-resistance grades may be preferred in more aggressive environments.

Stainless Steel Strap 50m Price in Kenya

Current Kenyan online examples include:

These are third-party market references and not fixed Fiber Optics Kenya prices. 

Typical Stainless Steel Strap 50m Price in Kenya

Based on current listings, standard 50m banding examples are available from roughly:

KES 2,700 – KES 9,500+

depending on grade, brand, width, thickness and supplier. 

Contact Fiber Optics Kenya for the current retail or bulk quotation.

What Affects Stainless Steel Strap Price?

Pricing depends on:

• Stainless-steel grade

• Width

• Thickness

• Roll length

• Tensile strength

• Manufacturer

• Edge finishing

• Packaging

• Brand

• VAT

• Import cost

• Order quantity

Advantages of Stainless Steel Strap 50m

Key advantages include:

• 50m continuous roll

• Strong mechanical fastening

• Corrosion-resistant material

• Suitable for outdoor installations

• Can be cut to required length

• Works with different pole diameters

• Suitable for ADSS hardware

• Suitable for FTTH projects

• Compatible with buckles and banding tools

• Useful for bulk contractor work

• Long service life

Common Applications

FTTH Networks

Used to install fibre distribution hardware on utility poles.

ADSS Fibre Networks

Suitable for securing brackets and accessories used along aerial ADSS routes.

ISP Networks

Commonly used in:

• Estate fibre installations

• Rural fibre networks

• Metropolitan fibre networks

• Backbone routes

• Distribution poles

Telecom Networks

Suitable for mounting telecom accessories to poles and structures.

CCTV Fibre Networks

Can support pole-mounted fibre and surveillance infrastructure.

Electrical Infrastructure

Stainless banding is also widely used for electrical and utility pole accessories.

Recommended Accessories

Frequently Asked Questions About Stainless Steel Strap 50m

What is Stainless Steel Strap 50m?

It is a continuous 50m roll of stainless-steel band used to mount hardware to poles, towers and other structures.

What is the common size?

20mm × 0.7mm × 50m is a common specification. 

Is 19mm also available?

Yes. Some ADSS versions are listed as 19 × 0.7 × 50m. 

How long is one roll?

50 metres.

How wide is the strap?

Approximately 19–20mm is common for this product category.

How thick is it?

0.7mm is a commonly available heavy-duty specification.

What material is it made from?

Stainless steel.

Is AISI 201 available?

Yes. 

Is it corrosion resistant?

Yes.

Can it be used outdoors?

Yes.

Can it be used for ADSS fibre?

Yes.

Can it be used for FTTH?

Yes.

Can it be used on concrete poles?

Yes.

Can it be used on wooden poles?

Yes, subject to the hardware design.

Can it be used on steel poles?

Yes.

Can it be used on telecom towers?

Yes, where band mounting is suitable.

Can it secure a Universal Pole Bracket?

Yes.

Can it secure J-Hook hardware?

Yes.

Can it secure a downlead clamp?

Yes.

Can it secure a cable storage bracket?

Yes, where the bracket is designed for band mounting.

Should it be wrapped directly around fibre cable?

No. It normally secures the mounting hardware rather than clamping directly onto the fibre.

Does it require a buckle?

Conventional installations normally use a compatible stainless-steel buckle.

What size buckle should I use?

Use a buckle compatible with the actual strap width and thickness.

Is a banding tool required?

A proper banding tool is recommended.

Can I use pliers?

Professional pole installations should use the correct tensioning tool.

Can the strap be cut to length?

Yes.

Can one roll be used on several poles?

Yes.

How many poles can a 50m roll cover?

It depends on pole circumference, number of bands per accessory and installation design.

Can two straps be used on one bracket?

Yes, and many hardware designs use two fixing bands. Follow the bracket manufacturer's installation requirements.

Is 20mm the same as 3/4 inch?

They are close. 3/4 inch is approximately 19.05mm.

Is 50m better than 30m?

For large projects, 50m provides more material and reduces roll changes.

Can stainless-steel strap rust?

Stainless steel is corrosion resistant, but the degree of resistance depends on stainless grade and environment.

Is AISI 304 better than 201?

304 generally provides greater corrosion resistance, particularly in harsher environments.

What is the Stainless Steel Strap 50m price in Kenya?

Current Kenyan online examples range from approximately KES 2,700 to KES 9,500+, depending on manufacturer and specification. 

Is there a 50m roll around KES 2,700?

Yes. One current Kenyan 19 × 0.7 × 50m listing is KES 2,700. 

Is there a 20 × 0.7mm 50m option?

Yes. Both Kenyan and manufacturer listings confirm this size. 

Do you supply Stainless Steel Strap 50m?

Yes, subject to stock availability.

Do you supply stainless-steel buckles?

Yes, subject to availability.

Do you supply banding tools?

Yes.

Do you supply Universal Pole Brackets?

Yes.

Do you supply J-Hook suspension clamps?

Yes.

Do you supply PA1500 and PA2000 clamps?

Yes.

Do you supply downlead clamps?

Yes.

Do you supply cable storage brackets?

Yes.

Can fibre contractors buy 50m straps in bulk?

Yes. Bulk purchasing is suitable for ISPs, telecom companies, FTTH contractors and infrastructure projects.

Do you deliver outside Nairobi?

Yes. Fiber Optics Kenya supplies fibre optic products and accessories across Kenya.

Why Buy Stainless Steel Strap 50m from Fiber Optics Kenya?

Contact Fiber Optics Kenya

Fiber Optics Kenya
Lyric House, 7th Floor Room S9
Kimathi Street, Nairobi

Phone: +254 704 991 492
Email: info@fibreopticskenya.co.ke

The Stainless Steel Strap 50m is a strong and versatile pole-line fastening solution used in ADSS, FTTH and telecom installations. Common models are approximately 19–20mm wide, 0.7mm thick and supplied in 50m rolls, with AISI 201 being one widely available stainless-steel grade. 

The strap is normally combined with a stainless-steel buckle and professional banding tool and can be used to mount Universal Pole Brackets, J-Hook suspension clamps, downlead clamps, storage brackets and other fibre accessories.

Current Kenyan examples range from approximately KES 2,700 to KES 9,500+ per 50m roll, depending on the exact steel grade, dimensions, manufacturer and supplier. 

Contact Fiber Optics Kenya for current Stainless Steel Strap 50m prices in Kenya, stainless-steel buckles, banding tools, Universal Pole Brackets, J-Hook clamps, PA-series tension clamps, downlead clamps, cable storage brackets, bulk orders and nationwide delivery.