SC Fibre Connectors Price in Kenya
SC APC Fast Connector in Kenya
KSh 50.00
1 available
Continue shoppingSC APC Fast Connector in Kenya
The SC APC Fast Connector is a field-installable fibre optic connector designed to terminate single-mode fibre quickly and professionally without conventional field polishing. It is widely used for FTTH, GPON, PON, fibre distribution, subscriber connections, repairs and access-network installations where a green SC/APC optical interface is required.
Modern field-installable fibre connectors use technologies such as factory-polished ferrules and mechanical splicing to simplify on-site fibre termination. Corning's no-polish connectors use a factory-polished ferrule assembly with an internal mechanical splice, while Fujikura's FAST series supports multiple fibre and cable sizes for rapid field termination.
At Fiber Optics Kenya, SC APC Fast Connectors provide a practical solution for fibre installers, ISPs, FTTH contractors, telecommunications companies, CCTV installers and network maintenance teams. Customers can also source compatible FTTH drop cables, SC/APC adapters, fibre cleavers, strippers, VFLs, optical power meters, PON meters, ODFs, FDBs and other installation accessories.
Key Product Specifications
| Specification | Details |
|---|---|
| Product Name | SC APC Fast Connector |
| Product Category | Field-Installable Fibre Optic Connector |
| Connector Type | SC |
| Connector Polish | APC |
| Typical Connector Colour | Green |
| Typical Fibre Mode | Single Mode |
| Typical Fibre Category | OS2 |
| Typical Fibre Size | 9/125 µm |
| Common Fibre Standards | G.652D / G.657A depending on model |
| Termination Method | Mechanical / Pre-Polished |
| Factory-Polished Ferrule | Yes on common designs |
| Fusion Splicing Required | No on mechanical models |
| Field Polishing Required | No on pre-polished models |
| Epoxy Required | No on no-epoxy designs |
| Typical Ferrule Material | Ceramic |
| Compatible Fibre Sizes | 250 µm / 900 µm depending on model |
| Cable Compatibility | 0.9 mm / 2.0 mm / 3.0 mm / drop cable depending on model |
| Typical Insertion Loss | Model dependent |
| Typical Operating Fibre | Single Mode |
| Main Applications | FTTH, GPON, FDB, ODF, drop cable, fibre repair |
| Installation Environment | Field / indoor / protected enclosure |
| Professional Installation | Available |
| Delivery | Available throughout Kenya |
Corning's no-polish SC APC-compatible connectors combine a factory-polished ferrule with a mechanical splice, while Fujikura's field-installable FAST family supports 0.25 mm fibre, 0.9 mm fibre, 2 mm/3 mm cords and drop/indoor cables.
What Is an SC APC Fast Connector?
An SC APC Fast Connector allows an installer to attach a standard SC/APC optical interface directly to prepared fibre at the installation site.
| Feature | SC APC Fast Connector |
|---|---|
| Field Installable | Yes |
| Connector Interface | SC/APC |
| Typical Colour | Green |
| Common Fibre Mode | Single Mode |
| Fusion Splicer Needed | No on mechanical designs |
| Field Polishing | Not required on pre-polished types |
| Typical Installation | FTTH drop fibre |
| Main Benefit | Rapid termination |
| Common User | ISP / FTTH installer / technician |
Corning identifies field-installable connector technologies such as UniCam, OptiSnap and NPC+ specifically for fast fibre termination without traditional epoxy-and-polish procedures.
What Does SC/APC Mean?
| Term | Meaning |
|---|---|
| SC | Subscriber / Standard Connector |
| APC | Angled Physical Contact |
| SC/APC | SC connector using an angled-polished optical interface |
| Fast Connector | Field-installable fibre connector |
| Single Mode | Fibre optimized for long-distance optical transmission |
| OS2 | Single-mode fibre category |
| Field Assembly | Connector fitted directly at installation site |
SC/APC fast connectors are normally easy to identify because of their green connector housing. Current commercial SC/APC quick connectors use this green identification convention.
SC APC Connector Features
| Feature | Benefit |
|---|---|
| Green Housing | Quick APC identification |
| SC Push-Pull Interface | Easy insertion and removal |
| APC Polish | Reduced optical reflection |
| Factory-Prepared Ferrule | Consistent connector end face |
| Single-Mode Compatibility | Suitable for access networks |
| FTTH Compatibility | Excellent |
| GPON Compatibility | Excellent |
| Fibre Distribution Use | Excellent |
| Field Installation | Faster deployment |
SC/APC field-installable connectors are commercially available specifically for FTTH and single-mode optical networks.
How an SC APC Fast Connector Works
Many fast connectors contain a short pre-terminated fibre stub inside the connector. The technician prepares the installed fibre and inserts it into the connector until it aligns with the internal fibre.
| Internal Component | Function |
|---|---|
| SC/APC Housing | Provides equipment interface |
| Ceramic Ferrule | Holds fibre in precise alignment |
| Factory-Polished Fibre Stub | Provides polished optical end face |
| Mechanical Splice | Aligns installed fibre to internal fibre |
| Locking Mechanism | Secures field fibre |
| Cable Clamp | Holds cable or fibre buffer |
| Rear Boot | Provides strain relief |
Corning's no-polish connector design specifically consists of a factory-polished ferrule assembly and a mechanical splice, allowing fibre termination without traditional polishing.
Typical Fibre Compatibility
| Fibre / Cable | Typical Compatibility |
|---|---|
| 250 µm Fibre | Supported by selected connector systems |
| 900 µm Buffered Fibre | Common |
| 2.0 mm Fibre Cord | Supported by many designs |
| 3.0 mm Fibre Cord | Supported by many designs |
| FTTH Drop Cable | Very Common |
| Indoor Fibre Cable | Common |
| G.652D Single Mode | Common |
| G.657 Bend-Insensitive Fibre | Common |
| OS2 Fibre | Very Common |
Fujikura states that its FAST connector family supports 0.25 mm fibre, 0.9 mm fibre, 2 mm/3 mm cords and drop/indoor cables, making fast connectors versatile for a wide range of field applications.
Typical Optical Performance
| Optical Parameter | Typical / Representative Description |
|---|---|
| Fibre Mode | Single Mode |
| Connector Interface | SC/APC |
| Common Wavelengths | 1310 / 1490 / 1550 nm |
| Connection Method | Mechanical on common fast connectors |
| Insertion Loss | Model dependent |
| Return Loss | APC design provides strong back-reflection performance |
| Factory Polishing | Yes on pre-polished designs |
| Field Polishing | Not required |
| Fusion Splicing | Not required on mechanical designs |
Fujikura states that its FAST series achieves an average connection loss of 0.5 dB or less and return loss of 40 dB or more, while exact values vary by connector type and model.
SC APC vs SC UPC Fast Connector
| Feature | SC/APC | SC/UPC |
|---|---|---|
| Typical Connector Colour | Green | Blue |
| Polish Type | Angled Physical Contact | Ultra Physical Contact |
| Back Reflection | Lower | Low |
| FTTH / PON Networks | Very Common | Equipment dependent |
| CATV Applications | Excellent | Less preferred |
| Enterprise Networks | Application dependent | Common |
| Direct APC-to-UPC Mating | No | No |
Always match the fast connector to the installed adapter, splitter, ONT, ODF or patch cord interface.
SC APC Fast Connector vs SC APC Pigtail
| Feature | SC APC Fast Connector | SC APC Pigtail |
|---|---|---|
| Connector Installation | Field installed | Factory installed |
| Fusion Splicing Required | No normally | Yes |
| Fusion Splicer Required | No | Yes |
| Field Cleaving Required | Yes | Yes for splice |
| Installation Speed | Fast | Moderate |
| FTTH Drops | Excellent | Excellent |
| ODF Termination | Suitable | Very Common |
| Emergency Repairs | Excellent | More involved |
| Permanent Infrastructure | Good | Excellent |
SC APC Fast Connector vs SC APC Patch Cord
| Feature | Fast Connector | Patch Cord |
|---|---|---|
| Connector Installed on Existing Fibre | Yes | No |
| Factory-Terminated Cable | No | Yes |
| Custom Installed Cable Length | Yes | Fixed |
| Fibre Cleaver Required | Yes | No |
| Ideal for Drop Cable Termination | Yes | Different purpose |
| Fibre Repair | Excellent | Limited |
| Plug and Play | After termination | Immediately |
Mechanical Fast Connector vs Fusion Splicing
| Feature | Mechanical Fast Connector | Fusion Splicing |
|---|---|---|
| Fusion Splicer Needed | No | Yes |
| Installation Speed | Fast | Moderate |
| Portable Tool Requirements | Lower | Higher |
| Connector Installation | Direct | Usually uses pigtail |
| Field Repair | Excellent | Excellent |
| Initial Equipment Cost | Lower | Higher |
| Optical Consistency | Installation dependent | Typically highly consistent |
| FTTH Customer Drops | Excellent | Excellent |
Tools Needed for SC APC Fast Connector Installation
| Tool | Purpose |
|---|---|
| FTTH Drop Cable Stripper | Removes outer cable sheath |
| Fibre Stripper | Removes fibre coating |
| Precision Fibre Cleaver | Creates accurate fibre end |
| Lint-Free Fibre Wipes | Cleans fibre |
| Isopropyl Alcohol | Removes contamination |
| Visual Fault Locator | Checks fibre continuity |
| Optical Power Meter | Measures optical signal |
| PON Power Meter | Tests FTTH/PON wavelengths |
| Connector Assembly Tool | Used by some connector designs |
A clean, accurate cleave is crucial because mechanical field connectors depend on precise alignment between the installed fibre and the connector's internal fibre.
Typical SC APC Fast Connector Installation Process
| Step | Installation Procedure |
|---|---|
| 1 | Prepare the fibre or FTTH drop cable |
| 2 | Strip the required cable jacket |
| 3 | Remove fibre coating |
| 4 | Clean exposed fibre |
| 5 | Precision-cleave the fibre |
| 6 | Open or prepare the fast connector |
| 7 | Insert fibre to specified depth |
| 8 | Activate the connector locking mechanism |
| 9 | Secure the cable clamp |
| 10 | Install the rear boot |
| 11 | Inspect completed connector |
| 12 | Test continuity |
| 13 | Measure optical power if required |
Exact strip and cleave dimensions vary between fast-connector designs, so installers should use the instructions supplied with the particular connector.
Why Choose an SC APC Fast Connector?
Fast Field Installation
The connector enables technicians to terminate fibre directly at customer premises, fibre cabinets or distribution points.
No Hand Polishing
Factory pre-polished connectors eliminate conventional hand polishing. FS describes its SC/APC fast connector as a factory pre-polished, field-installable connector.
Mechanical Fibre Connection
Quality field-installable designs can use an internal mechanical splice rather than fusion splicing.
Suitable for Multiple Cable Types
Modern field-installable systems can accommodate buffered fibres, fibre cords and drop cables.
Excellent for FTTH
SC/APC connectors are extensively used in subscriber access and PON fibre infrastructure.
Easy to Identify
The green housing helps technicians avoid confusing APC and UPC connectors.
Useful for Repairs
Fast connectors allow damaged field connectors to be replaced without replacing the entire fibre cable.
Watch SC APC Fast Connector
Watch on YouTube: https://youtu.be/SVZ5H9hcpHw
The SC APC Fast Connector provides a practical method of creating an SC/APC termination directly on installed single-mode fibre. Modern field-installable connector systems use factory-prepared optical interfaces, allowing installers to avoid conventional polishing and reduce the equipment required during customer installations and network maintenance. Corning's no-polish technology, for example, combines a factory-polished ferrule with an internal mechanical splice.
The connector is especially valuable for FTTH and access-network installations, where technicians may need to terminate numerous subscriber drop fibres quickly. Field-installable connector families are compatible with several fibre constructions, including 0.25 mm fibres, 0.9 mm buffered fibres, 2 mm and 3 mm cords, and drop cables, depending on model.
Installation quality still depends heavily on correct fibre preparation. The fibre should be stripped, cleaned and precision-cleaved according to the connector manufacturer's specified dimensions before insertion. Fiber Optics Kenya can supply SC APC Fast Connectors together with FTTH drop cables, SC/APC adapters, PLC splitters, fibre cleavers, strippers, VFLs, optical power meters, PON meters, FDBs and ODFs, allowing installers to source complete fibre termination solutions.
Applications of SC APC Fast Connector
1. FTTH Customer Connections
Terminate drop fibre before connecting compatible subscriber equipment.
2. GPON Networks
Create SC/APC field terminations within passive optical networks.
3. Fibre Distribution Boxes
Terminate subscriber fibres inside FDB and FAT boxes.
4. Fibre Wall Outlets
Create an SC/APC connection point at customer premises.
5. Fibre Repairs
Replace damaged connectors without replacing the entire fibre cable.
6. ISP Subscriber Installations
Provide fast termination during customer activation and maintenance.
7. Optical Distribution Frames
Useful for selected field termination applications.
8. CATV Fibre Networks
Provide APC interfaces where low optical reflection is important.
9. Telecommunications Networks
Create field-installable single-mode fibre connections.
10. Emergency Fibre Restoration
Restore failed fibre connectors quickly using portable installation tools.
Typical FTTH Network Using SC APC Fast Connector
| Network Stage | Typical Component |
|---|---|
| Provider Equipment | OLT |
| Optical Distribution | ODF |
| Signal Splitting | PLC Splitter |
| Distribution Fibre | Single Mode |
| Distribution Point | FDB / FAT Box |
| Subscriber Drop | FTTH Drop Cable |
| Field Termination | SC APC Fast Connector |
| Wall Termination | FTTH Fibre Box |
| Customer Equipment | Compatible ONT / ONU |
Recommended Accessories
| Accessory | Purpose |
|---|---|
| FTTH Drop Cable | Provides subscriber fibre connection |
| SC/APC Adapter | Couples APC connectors |
| SC/APC Patch Cord | Connects fibre termination to equipment |
| SC/APC Pigtail | Fusion-splice fibre termination |
| PLC Splitter | Splits optical PON signal |
| Fibre Cleaver | Precision-cleaves fibre |
| Fibre Stripper | Removes fibre coating |
| Drop Cable Stripper | Opens FTTH drop cable |
| Visual Fault Locator | Checks fibre continuity |
| Optical Power Meter | Measures optical levels |
| PON Power Meter | Tests PON optical signals |
| FDB / FAT Box | Distributes subscriber fibres |
| ODF | Organises fibre termination |
| Connector Cleaning Kit | Keeps fibre interfaces clean |
| OTDR | Tests fibre links |
Why Buy SC APC Fast Connector from Fiber Optics Kenya?
| Why Choose Fiber Optics Kenya? | Customer Benefit |
|---|---|
| SC/APC Fast Connectors | Quick field fibre termination |
| Single-Mode Solutions | Suitable for FTTH and telecom networks |
| FTTH Drop Cables | Complete subscriber installation solution |
| SC/APC Adapters | Matching fibre components |
| SC/APC Patch Cords | Compatible fibre connections |
| PLC Splitters | PON distribution products |
| Cleavers & Strippers | Fibre installation tools |
| VFLs & Power Meters | Testing equipment available |
| ODFs & FDB Boxes | Complete fibre-distribution solutions |
| Technical Guidance | Help matching connectors and fibre types |
| Bulk Supply | Suitable for ISPs and contractors |
| Competitive Pricing | Cost-effective fibre procurement |
| Nationwide Delivery | Supply throughout Kenya |
Frequently Asked Questions
What is an SC APC Fast Connector?
It is a field-installable SC/APC fibre connector designed to terminate optical fibre quickly at the installation site.
What colour is an SC APC Fast Connector?
SC/APC connectors are normally green, as shown by current commercial SC/APC field-assembly connectors.
What does APC mean?
APC means Angled Physical Contact.
Is an SC APC Fast Connector single mode?
SC/APC fast connectors are commonly designed for single-mode fibre and FTTH access networks.
Does it require fusion splicing?
Mechanical SC/APC fast connectors normally do not require fusion splicing. Corning's no-polish connectors use an internal mechanical splice.
Does it require hand polishing?
No on factory-pre-polished designs. FS specifically describes its SC/APC fast connector as factory pre-polished.
Does it require epoxy?
No on no-epoxy/no-polish connector systems such as Corning's field-installable technologies.
Can it work with 0.9 mm fibre?
Yes. Modern field-installable connector systems can support 0.9 mm buffered fibre depending on the model.
Can it work with 2 mm and 3 mm fibre cords?
Yes. Fujikura lists 2 mm and 3 mm fibre cords among the cable types supported by its FAST field-installable connector family.
Can it work with FTTH drop cable?
Yes. Drop-cable compatibility is a major feature of many field-installable fast connector designs.
What is the typical optical loss?
This depends on connector model and installation quality. Fujikura states an average connection loss of 0.5 dB or less for its FAST series.
Is it suitable for FTTH?
Yes. SC/APC fast connectors are widely used in FTTH customer-drop and access-network installations.
Can it be used in GPON?
Yes. SC/APC connectivity is commonly used in GPON and other passive optical network installations.
Can it connect to an ONT?
Yes, provided the ONT uses a compatible SC/APC optical interface.
Can SC APC connect directly to SC UPC?
No. APC and UPC connector end-face geometries differ and should not be directly mated.
What tools are needed?
Typically a drop cable stripper, fibre stripper, precision cleaver and fibre cleaning materials, plus a VFL or optical power meter for testing.
Why is a fibre cleaver important?
The quality of the mechanical connection depends on a clean, precise fibre end aligning correctly with the connector's internal fibre.
Can it be used for fibre repairs?
Yes. Fibre repairs are one of the major advantages of fast connectors because a failed connector can be replaced directly in the field.
Can it be used inside an FDB?
Yes. FDB and FAT boxes are common termination points in FTTH networks.
Can it be installed in an ODF?
Yes, although fusion-spliced pigtails are also commonly used for structured permanent ODF termination.
Is an SC APC Fast Connector reusable?
Some models permit retermination while others have manufacturer-specific limits. Check the exact connector specification before reusing it.
Do you supply SC/APC adapters?
Yes. Fiber Optics Kenya can supply matching SC/APC adapters and fibre accessories.
Do you supply SC/APC pigtails and patch cords?
Yes. Compatible SC/APC pigtails and patch cords can be supplied.
Do you supply FTTH drop cables?
Yes. Compatible indoor and outdoor FTTH drop cables can be supplied.
Do you supply fibre cleavers and strippers?
Yes. Fibre preparation tools for fast connector installation are available.
Do you supply VFLs and power meters?
Yes. Fibre testing equipment can be supplied for installation and maintenance work.
Do you provide fibre installation and testing?
Yes. Professional fibre termination, installation, troubleshooting and testing support is available.
Do you deliver outside Nairobi?
Yes. Fiber Optics Kenya supplies fibre optic products and accessories throughout Kenya.
Contact Fiber Optics Kenya
Fiber Optics Kenya
Lyric House
7th Floor Room S9
Kimathi Street
Nairobi
Phone: +254 704 991 492
Email: info@fibreopticskenya.co.ke
The SC APC Fast Connector provides a quick and convenient field termination solution for FTTH, GPON, fibre repairs and subscriber drop installations.
Contact Fiber Optics Kenya for competitive pricing, SC/APC fast connectors, FTTH accessories, installation tools, bulk orders and nationwide delivery across Kenya.