Huawei EchoLife HG8310M ONU Bridge Price in Kenya

The Huawei EchoLife HG8310M ONU Bridge is a compact fibre subscriber terminal designed for FTTH and passive optical network deployments. It provides a single Gigabit Ethernet (1GE) RJ45 port and operates primarily as a bridge between the optical fibre network and an external router, firewall, switch or customer device.

Unlike an integrated Wi-Fi ONT, the HG8310M is designed for installations where the ISP or customer wants to use a separate Wi-Fi router. This makes it particularly useful for ISPs using MikroTik, TP-Link, Ubiquiti or other routing equipment behind the fibre terminal.

Huawei documentation for the HG8310M describes a 1GE bridging-type ONT, with GPON Class B+ optics, 1310 nm upstream and 1490 nm downstream wavelengths, VLAN functions and low power consumption. Some market versions are also sold as EPON or XPON variants, so the exact PON version and connector should always be confirmed before deployment. 

Huawei HG8310M Key Specifications

Huawei's published ONT port specifications give GPON rates of 2.488 Gbps downstream and 1.244 Gbps upstream, a maximum optical reach of 20 km and a 10/100/1000 Mbps GE interface. 

What Is the Huawei EchoLife HG8310M?

The Huawei HG8310M is a simple bridge-type optical network terminal.

Its primary role is:

Optical Fibre → HG8310M → Gigabit Ethernet → Router

Instead of combining fibre termination, routing and Wi-Fi in one unit, the HG8310M concentrates on converting the PON fibre connection into Ethernet.

This gives network operators more freedom to choose their preferred router.

Huawei HG8310M Bridge Mode

The bridge-only architecture is one of the main reasons the HG8310M is useful for ISP networks.

A typical connection is:

OLT → PLC Splitter → FTTH Drop Cable → HG8310M → MikroTik Router → Customer

The ONU handles the optical connection while the external router can handle:

• PPPoE

• DHCP

• NAT

• Firewall

• Bandwidth management

• Wi-Fi

• VPN

• Hotspot

• Captive portal

• Customer LAN

• Traffic shaping

This separation can make network troubleshooting and subscriber management easier.

1GE Gigabit Ethernet Port

The HG8310M provides one Gigabit Ethernet interface.

Huawei's general ONT port specifications specify GE operation at:

• 10 Mbps

• 100 Mbps

• 1000 Mbps

with auto-adaptive operation over RJ45 Ethernet.

The Gigabit Ethernet interface makes the HG8310M preferable to older Fast Ethernet ONUs where subscriber packages may exceed 100 Mbps.

GPON Optical Interface

The documented GPON version of the HG8310M uses Class B+ optics.

Key optical parameters include:

These are PON-side line rates and should not be confused with the subscriber's actual Internet package speed. 

GPON, EPON and XPON Versions

Buyers should pay particular attention to the version being supplied.

The HG8310M name appears in the market on GPON, EPON and XPON-labelled units. The video you supplied specifically presents the product as an EPON ONU bridge, while Huawei-related documentation also describes the HG8310M as a GPON 1GE bridging ONT. 

Therefore, before purchasing or installing one, confirm:

This is especially important when buying HG8310M units in bulk.

Huawei HG8310M with MikroTik

The HG8310M is particularly useful where a MikroTik router handles subscriber networking.

Typical architecture:

Internet → MikroTik Core Router → OLT → PLC Splitter → HG8310M → Customer Router

Alternatively, at the customer premises:

HG8310M → MikroTik hAP → Customer Devices

The MikroTik can handle:

• PPPoE client

• PPPoE server

• DHCP

• NAT

• Firewall

• Queue management

• Wi-Fi

• VLANs

• VPN

• Routing

The HG8310M remains responsible for optical termination.

VLAN Support

Huawei's HG8310M specifications include support for several Ethernet VLAN functions, including:

• Ethernet port-based VLAN handling

• 1:1 VLAN

• N:1 VLAN

• VLAN transparent transmission

• QinQ

• MAC address learning

• MAC address restrictions

• Layer 2 IPv6 transparent transmission 

This makes the device useful for ISP networks that separate subscriber services through VLANs.

Compact and Low-Power Design

The HG8310M is designed as a small customer-premises terminal.

For one documented hardware revision, specifications include:

Hardware dimensions and consumption can vary by revision. 

LED Indicators

The HG8310M provides four primary status indicators:

Huawei's HG8310M specifications list POWER, PON, LOS and LAN as the device indicators. 

Why Use a Bridge ONU?

A bridge ONU can be advantageous when the ISP wants routing functions handled by separate equipment.

Better Router Choice

The customer or ISP can select a router according to coverage, Wi-Fi standard and performance requirements.

Easier Router Upgrades

The router can be replaced without necessarily replacing the optical terminal.

MikroTik Integration

Bridge ONUs work well in networks where MikroTik performs subscriber authentication and routing.

Avoid Double NAT

A properly designed bridge deployment can avoid having NAT on both the ONT and customer router.

Flexible Wi-Fi

The operator can pair the ONU with anything from an entry-level router to Wi-Fi 6/6E equipment.

Huawei HG8310M vs Wi-Fi ONT

Huawei HG8310M vs 1FE ONU

For modern FTTH installations, the 1GE interface is an important advantage.

Huawei HG8310M Network Architecture

A complete deployment can look like:

Watch Huawei EchoLife HG8310M ONU Bridge

Huawei EchoLife HG8310M ONU Bridge

The Huawei EchoLife HG8310M is particularly useful for ISPs that want a straightforward separation between optical termination and customer routing. The ONU handles the PON connection while an external router handles Wi-Fi, PPPoE, DHCP, NAT and other subscriber-facing network functions.

Its single Gigabit Ethernet interface also makes it appropriate for modern broadband packages where a 100 Mbps Fast Ethernet ONU could become a bottleneck. Huawei's documentation confirms support for 10/100/1000 Mbps Ethernet operation as well as extensive Layer 2 and VLAN functionality. 

For FTTH network operators, the HG8310M can be deployed alongside OLTs, PLC splitters, ODFs, fibre closures, FAT boxes, drop cables, ATBs and external routers to create a complete end-to-end subscriber connection.

Applications of Huawei HG8310M

FTTH Internet

Suitable as the optical terminal at residential customer premises.

ISP Subscriber Connections

ISPs can deploy HG8310M units as bridge ONUs and use separate routers for subscriber services.

Apartment Internet

Each subscriber can receive an individual optical terminal.

Residential Estates

Useful for estate FTTH networks connected through PLC splitters.

Business Fibre

The Gigabit Ethernet port can connect an external enterprise router or firewall.

MikroTik Networks

Suitable for MikroTik-based PPPoE and subscriber-management deployments.

CCTV Fibre Networks

The Ethernet output can connect a network switch or router in properly designed surveillance networks.

Rural Fibre Networks

Its compact bridge architecture makes it useful for straightforward FTTH subscriber deployments.

What to Check Before Buying HG8310M

Before purchasing, confirm:

1. PON technology – GPON, EPON or XPON

2. OLT compatibility

3. Optical connector type

4. Authentication method

5. Firmware version

6. Bridge-mode requirements

7. Power adapter

8. Required subscriber Internet speed

This is particularly important because multiple HG8310M variants and market-labelled versions exist.

Frequently Asked Questions

What is Huawei EchoLife HG8310M?

The HG8310M is a compact 1GE bridge-type ONU/ONT used to terminate fibre PON connections and provide Gigabit Ethernet to an external router or device. 

Is Huawei HG8310M an ONU or ONT?

It can be described as either an ONU or ONT. Huawei documentation generally uses ONT terminology, while it is widely sold in the market as an ONU bridge.

Is Huawei HG8310M a bridge ONU?

Yes. The HG8310M is designed as a bridging-type optical terminal. 

Does Huawei HG8310M have Wi-Fi?

No. The basic HG8310M is a bridge terminal and does not provide integrated Wi-Fi.

Do I need a router with Huawei HG8310M?

If you need Wi-Fi, routing, NAT or other customer networking functions, you normally connect a separate router.

Does Huawei HG8310M have Gigabit Ethernet?

Yes. It provides one 10/100/1000 Mbps GE interface. 

How many Ethernet ports does HG8310M have?

One Gigabit Ethernet port.

Can Huawei HG8310M work with MikroTik?

Yes. The ONU can bridge the fibre connection to a MikroTik router.

Can MikroTik handle PPPoE behind the HG8310M?

Yes, where the ISP network and ONU provisioning are configured accordingly.

Is HG8310M GPON?

Huawei documentation describes a GPON 1GE version using Class B+ optics. 

Is HG8310M available as EPON?

The supplied video demonstrates and identifies an HG8310M unit as an EPON ONU bridge. 

Is Huawei HG8310M XPON?

Some HG8310M units are marketed as XPON GPON/EPON bridge devices. Because versions vary, verify the exact unit and firmware before purchasing. 

What is the Ethernet speed of HG8310M?

The Gigabit Ethernet interface supports 10/100/1000 Mbps operation. 

What is the GPON downstream speed?

The GPON interface has a nominal downstream line rate of approximately 2.488 Gbps. 

What is the GPON upstream speed?

Approximately 1.244 Gbps. 

Does that mean one customer gets 2.488 Gbps?

No. That is the GPON-side line rate shared within the PON architecture. Actual subscriber Internet speed depends on the ISP package, OLT configuration, contention, Ethernet interface and network conditions.

What wavelengths does HG8310M GPON use?

Huawei specifications list 1310 nm upstream and 1490 nm downstream. 

What is the maximum GPON transmission distance?

Huawei's GPON port specifications specify a maximum reach of 20 km, subject to the actual optical power budget. 

What does the LOS light mean?

LOS means Loss of Signal and relates to the optical fibre connection.

What does the PON light mean?

It indicates the status of the ONU's PON connection and registration.

Does HG8310M support VLANs?

Yes. Huawei documentation specifies VLAN handling, transparent transmission and QinQ functionality. 

Does HG8310M support IPv6?

Huawei documentation specifies Layer 2 transparent transmission of IPv6 packets. 

Can I connect a TP-Link router to HG8310M?

Yes. The Gigabit Ethernet output can connect to the WAN port of a compatible router.

Can I connect a Ubiquiti router?

Yes.

Can I connect a computer directly to HG8310M?

Technically yes, depending on how the ISP provisions and authenticates the subscriber service. A router is generally preferable for normal multi-device deployments.

Can HG8310M be used for residential FTTH?

Yes.

Can HG8310M be used for business fibre?

Yes, particularly when an external router or firewall will manage the business network.

Can I replace a Wi-Fi ONT with HG8310M?

Potentially, provided it is compatible with the OLT and correctly provisioned. You would need a separate Wi-Fi router.

Can HG8310M replace a media converter?

It can provide fibre-to-Ethernet conversion within a compatible PON network, but an ONU and a conventional Ethernet media converter use different network architectures and are not universally interchangeable.

Can I connect HG8310M directly to a PLC splitter?

Yes. In a properly engineered PON network, the ONU connects through the optical distribution network that includes PLC splitters.

Does the HG8310M require electricity?

Yes. It is active equipment and requires a DC power supply.

Is HG8310M good for ISPs?

Yes. Its bridge architecture, Gigabit Ethernet interface, small size and low power consumption make it useful for many FTTH subscriber installations.

Can ISPs buy Huawei HG8310M in bulk?

Yes. Bulk procurement is suitable for ISP subscriber rollouts, subject to model availability and OLT compatibility.

Should I test HG8310M before buying in bulk?

Yes. Always test the exact hardware and firmware version against your OLT, authentication method and VLAN configuration before large-scale deployment.

Why Buy Huawei HG8310M from Fiber Optics Kenya?

Fiber Optics Kenya can supply the HG8310M together with the other equipment required to build a complete FTTH network, including:

• EPON and GPON OLTs

• XPON ONUs

• Wi-Fi ONTs

• PLC splitters

• ODFs

• FAT boxes

• Fibre closures

• ADSS fibre cables

• FTTH drop cables

• SC/APC and SC/UPC adapters

• Fibre patch cords

• Fibre pigtails

• Fast connectors

• Fusion splicers

• Optical power meters

• PON power meters

• VFLs

• OTDRs

Contact Fiber Optics Kenya

Fiber Optics Kenya
Lyric House, 7th Floor Room S9
Kimathi Street, Nairobi

Phone: +254 704 991 492
Email: info@fibreopticskenya.co.ke

The Huawei EchoLife HG8310M ONU Bridge is a compact and practical subscriber terminal for FTTH operators that prefer to keep fibre termination separate from customer routing and Wi-Fi. Its 1GE Gigabit Ethernet port, bridge architecture, VLAN functionality and low power consumption make it particularly useful for ISP deployments using external routers such as MikroTik.

Because HG8310M units appear in GPON, EPON and XPON-labelled variants, buyers should verify the exact PON technology, optical connector, firmware and OLT compatibility before deployment—especially when purchasing in bulk. The video provided specifically demonstrates an EPON HG8310M bridge ONU. 

Contact Fiber Optics Kenya for Huawei EchoLife HG8310M ONU Bridge prices in Kenya, bulk ISP orders, compatible OLTs, PLC splitters, FTTH accessories, configuration guidance and nationwide delivery.