Fiber Optic Cable Prices in Kenya
2 Core FTTH Drop Cable 2KM in Kenya
KSh 12,000.00
1 available
Continue shopping2 Core FTTH Drop Cable 2KM in Kenya
The 2 Core FTTH Drop Cable 2KM is a high-quality single-mode fibre optic cable designed for connecting subscribers to Fiber to the Home (FTTH), Fiber to the Building (FTTB), GPON, EPON and other FTTx networks. Supplied in a convenient 2,000-metre roll, it is particularly suitable for ISPs, fibre contractors and organizations undertaking multiple last-mile fibre installations.
Typical 2 Core FTTH Drop Cable uses G657A1 or G657A2 bend-insensitive single-mode fibre. The bend-resistant properties of G657 fibre make it particularly suitable for subscriber installations where cables must pass around walls, corners, ceilings, conduits and building entrances. Kenyan market listings specifically offer GJYXCH-2F cable with G657A1 fibre in both 1,000 m and 2,000 m lengths.
The two optical fibres provide greater flexibility than a single-core drop cable. Depending on the network architecture, one fibre can provide the active subscriber connection while the second can remain available as a spare, for redundancy or for future network requirements.
At Fiber Optics Kenya, the 2 Core FTTH Drop Cable 2KM is ideal for ISPs, contractors, estates, apartment developments, businesses, schools and organizations looking for dependable last-mile fibre connectivity. Customers can also source compatible connectors, splitters, termination boxes, clamps, pigtails and other FTTH accessories.
Key Product Specifications
| Specification | Details |
|---|---|
| Product Name | 2 Core FTTH Drop Cable 2KM |
| Cable Category | FTTH Fibre Optic Drop Cable |
| Cable Length | 2,000 Metres / 2KM |
| Number of Fibres | 2 Cores |
| Fibre Mode | Single Mode |
| Common Fibre Types | G657A1 / G657A2 |
| Typical Fibre Size | 9/125 µm |
| Common Cable Design | GJYXCH / GJYXFCH |
| Cable Profile | Flat / Bow-Type / Figure-8 |
| Strength Members | Steel / FRP / KFRP depending on model |
| Messenger Wire | Available on self-supporting models |
| Outer Sheath | LSZH / PVC / PE depending on construction |
| Typical Outdoor Colour | Black |
| Common Wavelengths | 1310 nm / 1490 nm / 1550 nm |
| Primary Application | FTTH Subscriber Drop |
| Network Compatibility | GPON / EPON / FTTx |
| Installation | Indoor / Outdoor / Aerial / Conduit depending on model |
| Roll Length | 2KM |
| Professional Installation | Available |
| Delivery | Available across Kenya |
A Kenyan GJYXCH-2F listing specifies G657A1 fibre, attenuation below 0.40 dB/km at 1310 nm and below 0.30 dB/km at 1550 nm, with 1KM and 2KM lengths available.
2 Core FTTH Drop Cable Construction
The compact construction of the 2 Core FTTH Drop Cable allows technicians to route, strip, splice and terminate the cable efficiently during subscriber installations.
| Cable Component | Function |
|---|---|
| 2 Optical Fibres | Carry optical communication signals |
| G657A1/G657A2 Fibre | Provides bend-insensitive single-mode transmission |
| Fibre Coating | Protects the glass fibres |
| FRP Strength Members | Provide dielectric reinforcement |
| KFRP Members | Alternative non-metallic reinforcement |
| Steel Strength Members | Improve mechanical strength |
| Messenger Wire | Supports appropriate aerial installations |
| LSZH Sheath | Provides low-smoke, zero-halogen protection |
| PE/PVC Sheath | Available depending on cable application |
| Cable Groove | Makes stripping and fibre access easier |
A typical self-supporting GJYXCH design uses the optical fibres between parallel strength members with a separate messenger section for aerial support.
Detailed Optical Specifications
| Optical Characteristic | Typical Specification |
|---|---|
| Fibre Mode | Single Mode |
| Common Fibre Grade | G657A1 / G657A2 |
| Core/Cladding Type | 9/125 µm |
| Operating Wavelength | 1310 nm |
| Operating Wavelength | 1550 nm |
| Typical Attenuation @ 1310 nm | ≤0.40 dB/km |
| Typical Attenuation @ 1550 nm | ≤0.30 dB/km |
| Bend Insensitive | Yes |
| GPON Compatibility | Excellent |
| EPON Compatibility | Excellent |
| FTTH Compatibility | Excellent |
| FTTB Compatibility | Excellent |
The exact optical specifications depend on the supplied fibre. G657A2 self-supporting drop-cable specifications also commonly state attenuation of ≤0.4 dB/km at 1310 nm and ≤0.3 dB/km at 1550 nm.
Typical G657A2 Mechanical Specifications
The following table illustrates a representative 2-core GJYXCH G657A2 construction. Exact specifications should be confirmed for the cable supplied.
| Parameter | Representative Specification |
|---|---|
| Fibre Count | 2 |
| Cable Type | GJYXCH-2B6 |
| Fibre Type | G657A2 |
| Cable Dimensions | Approx. 5.2 × 2.0 mm |
| Sheath Material | LSZH |
| Sheath Colour | Black |
| Approximate Weight | 19.5 kg/km |
| Static Bend Radius | 10 mm* |
| Dynamic Bend Radius | 25 mm* |
| Short-Term Tensile Load | 600 N |
| Long-Term Tensile Load | 300 N |
| Short-Term Crush Resistance | 2,200 N/100 mm |
| Long-Term Crush Resistance | 1,100 N/100 mm |
| Operating Temperature | -20°C to +60°C |
*Representative manufacturer figures excluding the messenger wire where specified.
Why Choose a 2KM Roll?
The 2KM cable length is particularly attractive for ISPs and contractors carrying out multiple installations.
| 2KM Roll Advantage | Benefit |
|---|---|
| 2,000 Metres of Cable | Suitable for numerous subscriber connections |
| Bulk Cable Supply | Ideal for ISP deployments |
| Fewer Roll Changes | Improves technician productivity |
| Flexible Cable Cutting | Cut according to each customer's route |
| Reduced Procurement Frequency | More cable available per roll |
| Better Stock Management | Suitable for installation teams |
| Estate Deployment | Useful for multiple residential connections |
| Apartment Projects | Suitable for connecting numerous units |
| Commercial Deployment | Supports multiple business connections |
| Network Expansion | Cable readily available for new subscribers |
Both Kenyan and international suppliers list FTTH drop cable in 2,000-metre packaging, making 2KM a practical standard option for larger deployments.
How Many Customers Can a 2KM Roll Connect?
The actual number depends on the average cable length required per subscriber.
| Average Drop per Customer | Approximate Connections from 2KM* |
|---|---|
| 20 metres | 100 |
| 25 metres | 80 |
| 40 metres | 50 |
| 50 metres | 40 |
| 80 metres | 25 |
| 100 metres | 20 |
| 150 metres | 13 |
| 200 metres | 10 |
*Theoretical values before allowing for routing slack, wastage, service loops and installation reserves.
For an ISP connecting customers within a dense estate or apartment development, a 2KM roll can therefore support a substantial number of individual installations.
G657A1 vs G657A2 FTTH Drop Cable
| Feature | G657A1 | G657A2 |
|---|---|---|
| Mode | Single Mode | Single Mode |
| Bend Insensitive | Yes | Yes |
| Bending Performance | Excellent | Enhanced |
| FTTH | Excellent | Excellent |
| GPON | Excellent | Excellent |
| EPON | Excellent | Excellent |
| Indoor Routing | Excellent | Excellent |
| Outdoor Drop | Excellent | Excellent |
| Tight Routing | Very Good | Better |
| Subscriber Installation | Excellent | Excellent |
G657A2 is especially attractive where subscriber routing involves tighter corners, although both G657A1 and G657A2 are widely used for FTTH access networks.
Why Choose 2 Core Instead of 1 Core?
| Feature | 1 Core | 2 Core |
|---|---|---|
| Number of Fibres | 1 | 2 |
| Primary Subscriber Connection | Yes | Yes |
| Spare Fibre | No | Yes |
| Redundancy Potential | Limited | Better |
| Future Expansion | Limited | Better |
| Multiple Optical Services | Limited | More flexible |
| Cable Size | Very Compact | Compact |
| Installation Difficulty | Low | Low |
| FTTH Networks | Excellent | Excellent |
| ISP Networks | Excellent | Excellent |
For many GPON installations, one fibre carries the subscriber service while the second fibre can remain available for future use.
Indoor vs Outdoor 2 Core FTTH Drop Cable
| Feature | Indoor | Outdoor |
|---|---|---|
| Primary Environment | Inside buildings | External routes |
| Typical Colour | White | Black |
| Common Sheath | LSZH | LSZH / PE depending on design |
| UV Resistance | Not primary requirement | Important |
| Weather Resistance | Limited | Higher |
| Messenger Wire | Usually No | Available |
| Wall Routing | Excellent | Excellent |
| Conduit Routing | Excellent | Excellent |
| Pole-to-Premises | Not preferred | Excellent with suitable construction |
| FTTH Termination | Excellent | Excellent |
Standard vs Self-Supporting FTTH Drop Cable
| Feature | Standard Drop Cable | Self-Supporting Drop Cable |
|---|---|---|
| Optical Fibres | 2 | 2 |
| Strength Members | Yes | Yes |
| Messenger Wire | No | Yes |
| Typical Shape | Flat | Figure-8 / Flat + Messenger |
| Indoor Routing | Excellent | Model dependent |
| Outdoor Routing | If appropriately rated | Excellent |
| Aerial Drop | Not preferred | Excellent |
| Pole-to-House Connection | No | Excellent |
| Mechanical Support | Moderate | Higher |
Self-supporting GJYXCH cable is designed to combine the fibre drop section with an additional load-bearing member, making it useful for suitable aerial FTTH connections.
Key Benefits of 2 Core FTTH Drop Cable 2KM
2,000 Metres per Roll
The longer roll is particularly convenient for ISP teams and contractors completing multiple installations.
Bend-Insensitive Fibre
G657A1 and G657A2 fibre helps maintain optical performance where tighter routing is required.
Two Optical Cores
The second fibre provides additional flexibility for spare capacity, redundancy or future network requirements.
Compact Construction
The flat cable design makes it easier to route along walls, through conduits and into customer premises.
Easy Stripping and Splicing
Grooved drop-cable construction is designed to simplify preparation, installation and maintenance.
Aerial Installation Options
Self-supporting versions can incorporate a steel messenger for suitable pole-to-premises connections.
GPON and EPON Compatible
The single-mode fibre is ideal for modern passive optical access networks.
Suitable for Large ISP Rollouts
A 2KM roll reduces the frequency with which installation teams need to replace cable rolls during subscriber deployments.
Watch 2 Core FTTH Drop Cable 2KM
Watch 2 Core FTTH Drop Cable 2KM on YouTube
The 2 Core FTTH Drop Cable 2KM provides a practical solution for ISPs and fibre contractors that need sufficient cable stock for repeated subscriber installations. Instead of purchasing numerous short cable lengths, technicians can cut each customer drop according to the actual route while maintaining the remaining cable on the roll for subsequent connections. The 2KM length is commercially available for this type of FTTH drop cable.
Its G657A1 or G657A2 bend-insensitive single-mode fibre is particularly well suited to the final section of an optical access network. Subscriber installations frequently require fibre to travel around building corners, through conduits and along walls before reaching a termination box or ONT. G657 fibre is designed specifically to perform better under these demanding bend conditions than conventional fibre types used primarily for less restrictive backbone routes.
The two-core construction also gives network operators useful additional capacity. A typical GPON subscriber service can operate over one fibre, leaving another available for backup or future requirements. When combined with appropriate SC/APC connectors, PLC splitters, FDBs, drop cable clamps, termination boxes and ONTs, the 2 Core FTTH Drop Cable provides a complete pathway from the fibre distribution network to the subscriber.
Applications of 2 Core FTTH Drop Cable 2KM
1. Fiber to the Home
Ideal for connecting residential customers directly to an ISP fibre network.
2. ISP Last-Mile Networks
The 2KM roll is particularly useful for installation teams connecting multiple customers.
3. GPON Networks
Connect individual subscribers from PLC splitters and distribution boxes to ONTs.
4. EPON Networks
Suitable for subscriber access in compatible EPON deployments.
5. Residential Estates
One roll can be divided into numerous customer drops across an estate.
6. Apartment Buildings
Suitable for connecting multiple apartments from centralized fibre distribution points.
7. Offices and Commercial Buildings
Provide direct fibre connections to individual businesses and office units.
8. Hotels and Resorts
Useful for appropriate fibre distribution between buildings and network termination points.
9. Schools and Universities
Suitable for last-mile connections between distribution points and individual buildings.
10. Hospitals and Institutions
Can provide reliable optical access connections throughout large compounds.
Typical FTTH Network Architecture
| Network Component | Function |
|---|---|
| OLT | Originates the PON service |
| Feeder Fibre | Carries network capacity |
| Joint Closure | Protects optical splices |
| PLC Splitter | Divides the optical signal |
| FAT / FDB | Provides subscriber distribution |
| 2 Core FTTH Drop Cable | Connects individual customer |
| Rosette / Termination Box | Terminates fibre at premises |
| SC/APC Connector | Provides optical connection |
| Patch Cord | Links termination to ONT |
| ONT / ONU | Terminates subscriber PON service |
| Router | Provides LAN and Wi-Fi connectivity |
2 Core FTTH Drop Cable vs ADSS Cable
| Feature | 2 Core FTTH Drop Cable | ADSS Fibre Cable |
|---|---|---|
| Primary Application | Subscriber last mile | Aerial distribution/backbone |
| Typical Fibre Count | 2 | Much higher options |
| Cable Size | Small | Larger |
| Customer Drop | Excellent | Not primary purpose |
| Long Pole Spans | Limited | Excellent |
| Aerial Capability | Self-supporting versions | Yes |
| High Fibre Capacity | No | Yes |
| Installation Near Premises | Excellent | Less convenient |
| Typical Network Position | Last Mile | Feeder / Distribution |
2 Core FTTH Drop Cable vs Cat6 Cable
| Feature | 2 Core FTTH Drop Cable | Cat6 |
|---|---|---|
| Transmission Medium | Optical Fibre | Copper |
| Signal Type | Light | Electrical |
| Long-Distance Capability | Excellent | More limited |
| Electromagnetic Interference | Immune | Can be affected |
| GPON Compatibility | Yes | No |
| EPON Compatibility | Yes | No |
| FTTH Last Mile | Excellent | Different application |
| Bandwidth Potential | Very High | Category dependent |
| Electrical Conductivity | Optical fibre itself is non-conductive | Conductive |
Recommended Accessories
| Accessory | Purpose |
|---|---|
| SC/APC Fast Connector | Terminates subscriber fibre |
| SC/UPC Fast Connector | Alternative termination |
| SC/APC Pigtail | Fusion-spliced termination |
| FTTH Rosette Box | Indoor subscriber termination |
| FAT / FDB | Distributes fibres to customers |
| PLC Splitter | Divides PON optical signals |
| Drop Cable Clamp | Secures aerial cable |
| Tension Clamp | Anchors suitable drop cable |
| Joint Closure | Protects external splices |
| Splice Protection Sleeve | Protects fusion splice |
| SC/APC Patch Cord | Connects fibre equipment |
| ONT / ONU | Terminates subscriber service |
| Optical Power Meter | Measures optical signal level |
| Visual Fault Locator | Helps identify fibre faults |
| Fusion Splicer | Creates permanent fibre joints |
Why Buy 2 Core FTTH Drop Cable 2KM from Fiber Optics Kenya?
Choosing the right drop cable helps ISPs and contractors reduce installation problems, improve network reliability and prepare their access networks for future customer growth.
| Why Choose Fiber Optics Kenya? | Customer Benefit |
|---|---|
| 2KM Roll Options | More cable for multiple installations |
| 2 Core Capacity | Active and spare fibre flexibility |
| G657 Fibre Options | Excellent bend performance |
| Outdoor Options | Suitable for external routes |
| Self-Supporting Options | Suitable for aerial subscriber drops |
| Bulk ISP Supply | Ideal for network rollouts |
| Competitive Pricing | Better project cost management |
| Technical Guidance | Assistance selecting cable |
| Complete FTTH Accessories | Cable and accessories from one supplier |
| Professional Installation | Installation support available |
| Fusion Splicing | Professional termination |
| Nationwide Delivery | Supply throughout Kenya |
Frequently Asked Questions About 2 Core FTTH Drop Cable 2KM
What is 2 Core FTTH Drop Cable 2KM?
It is a 2,000-metre roll of fibre optic drop cable containing two optical fibres, primarily designed for FTTH and other last-mile subscriber connections.
Is the cable really 2KM long?
Yes. 2 Core FTTH Drop Cable is commercially available in 2,000-metre lengths, although customers should always confirm the specific roll length before purchasing.
What fibre does it use?
Common versions use G657A1 or G657A2 bend-insensitive single-mode fibre.
Is it suitable for GPON?
Yes. Single-mode FTTH drop cable is widely used for GPON subscriber connections.
Is it suitable for EPON?
Yes, when used with compatible EPON equipment and network components.
Why are there two fibres?
The second fibre can provide spare capacity, redundancy or flexibility for future network requirements.
Can one fibre remain unused?
Yes. One core can provide the subscriber service while the other remains spare where the network design permits.
Is the cable suitable for outdoor use?
Yes, when an appropriate outdoor-rated construction is selected.
Can it be installed aerially?
Yes. Self-supporting GJYXCH designs include an additional strength member or messenger suitable for appropriate aerial subscriber connections.
What is GJYXCH cable?
GJYXCH is a common self-supporting FTTH drop cable construction used for subscriber access connections.
What is the attenuation?
A commonly listed G657A1 GJYXCH-2F specification gives attenuation below 0.40 dB/km at 1310 nm and 0.30 dB/km at 1550 nm.
Is 2KM better than a 1KM roll?
For larger projects, 2KM provides more cable per roll and can reduce roll changes and procurement frequency. For smaller projects, 1KM may be easier to handle.
How many customers can a 2KM roll connect?
It depends entirely on average drop length. At an average of 50 metres per subscriber, for example, the theoretical maximum is approximately 40 connections before allowing for slack and wastage.
What connectors are commonly used?
SC/APC connectors are widely used in FTTH and GPON networks.
Can I use the cable inside buildings?
Yes, provided the selected jacket and cable construction meet the installation requirements for the building.
Do you supply FTTH termination boxes?
Yes. Fiber Optics Kenya can supply compatible fibre termination and distribution accessories.
Do you supply PLC splitters?
Yes. PLC splitters and related passive optical network components can be supplied.
Do you provide fusion splicing?
Yes. Professional fibre termination, fusion splicing and testing can be provided according to project requirements.
Can ISPs order in bulk?
Yes. Bulk supply is suitable for ISPs, network contractors, estates and other large FTTH projects.
Do you deliver outside Nairobi?
Yes. Fiber Optics Kenya supplies fibre optic cables and accessories throughout Kenya.
Contact Fiber Optics Kenya
Fiber Optics Kenya
Lyric House
7th Floor, Room S9
Kimathi Street
Nairobi
Phone: +254 704 991 492
Email: info@fibreopticskenya.co.ke
The 2 Core FTTH Drop Cable 2KM is an excellent choice for ISPs, contractors and organizations deploying multiple FTTH connections. Its long 2KM roll, two-core capacity and bend-insensitive single-mode fibre make it practical for reliable and scalable last-mile networks.
Contact Fiber Optics Kenya for competitive prices, bulk orders, FTTH accessories, installation support and nationwide delivery.