Bare Fibre PLC Splitters Price in Kenya
1x2 Splitter with SC/UPC Connectors in Kenya
KSh 350.00
1 available
Continue shopping1x2 Splitter with SC/UPC Connectors in Kenya
The 1x2 Splitter with SC/UPC Connectors is a passive fibre optic device designed to divide one incoming single-mode optical signal into two output paths while providing ready-to-use SC/UPC connector interfaces. It is widely used in FTTH, GPON, EPON, telecommunications and other passive optical networks where one feeder fibre needs to branch into two downstream connections.
Unlike a bare PLC splitter, this version arrives with factory-terminated SC/UPC connectors, which are typically identified by their blue housings. This reduces the amount of field termination required and allows the splitter to connect directly to compatible SC/UPC adapters, patch panels, fibre distribution boxes and optical equipment. Commercial 1x2 SC/UPC PLC splitters are commonly supplied using single-mode fibre, with operating wavelength ranges around 1260–1650 nm.
At Fiber Optics Kenya, the 1x2 Splitter with SC/UPC Connectors is suitable for ISPs, FTTH installers, telecommunications contractors, CCTV fibre projects and enterprise fibre networks. Customers can also source matching SC/UPC adapters, patch cords, pigtails, FDB/FAT boxes, ODFs, fibre cleaning tools and optical testing equipment.
Key Product Specifications
| Specification | Details |
|---|---|
| Product Name | 1x2 Splitter with SC/UPC Connectors |
| Product Type | Fibre Optic PLC Splitter |
| Configuration | 1 × 2 |
| Number of Inputs | 1 |
| Number of Outputs | 2 |
| Splitter Technology | Planar Lightwave Circuit |
| Connector Type | SC/UPC |
| Connector Colour | Blue commonly |
| Fibre Mode | Single Mode |
| Common Fibre Type | G.657A1 / G.652D depending on model |
| Typical Fibre Size | 9/125 µm |
| Typical Split Ratio | Balanced / approximately 50:50 |
| Operating Wavelength | 1260–1650 nm |
| Typical Fibre Length | 1 m / 1.5 m depending on model |
| Typical Insertion Loss | Around ≤3.9–4.2 dB |
| Typical Uniformity | ≤0.4–0.6 dB |
| Typical PDL | ≤0.2 dB |
| Typical Directivity | ≥55 dB |
| Typical Operating Temperature | -40°C to +85°C |
| Electrical Power Required | No |
| Applications | FTTH, GPON, EPON, ODF, FDB, PON |
| Professional Installation | Available |
| Delivery | Available throughout Kenya |
A current 1x2 SC/UPC PLC splitter specification lists 1260–1650 nm operation, ≤4.2 dB insertion loss and ≤0.6 dB uniformity, while another 1x2 single-mode product specifies typical insertion loss of 3.9 dB, ≤0.4 dB uniformity and ≤0.2 dB PDL.
What Does 1x2 SC/UPC Splitter Mean?
| Term | Meaning |
|---|---|
| 1x2 | One optical input divided into two outputs |
| SC | Standard / Subscriber Connector |
| UPC | Ultra Physical Contact |
| PLC | Planar Lightwave Circuit |
| Single Mode | Fibre designed for long-distance optical transmission |
| Balanced | Optical power divided approximately equally |
| Splitter | Passive device that divides optical power |
| PON | Passive Optical Network |
The splitter requires no external power because the optical division is entirely passive.
How a 1x2 PLC Splitter Works
A 1x2 splitter receives an optical signal through one input and divides it into two downstream paths.
| Stage | Function |
|---|---|
| Input SC/UPC Connector | Receives incoming optical signal |
| PLC Optical Circuit | Divides optical power |
| Output 1 SC/UPC | Carries first optical branch |
| Output 2 SC/UPC | Carries second optical branch |
A balanced 1x2 splitter ideally divides the incoming optical power approximately 50:50 between both outputs. Real-world splitter insertion loss is slightly higher than the theoretical 3 dB power division because of internal device and connector losses. Commercial 1x2 PLC splitters commonly specify around 3.8–4.2 dB insertion loss.
Typical Optical Distribution
| Input | Output | Approximate Ideal Share |
|---|---|---|
| 1 Input | Output 1 | 50% |
| 1 Input | Output 2 | 50% |
The exact optical power on each output depends on splitter uniformity, connector condition, fibre attenuation and the rest of the network.
SC/UPC Connector Features
The SC/UPC connector provides a convenient plug-and-play interface.
| Feature | Benefit |
|---|---|
| Blue Housing | Easy UPC identification |
| SC Push-Pull Design | Easy insertion and removal |
| Approx. 2.5 mm Ferrule | Stable fibre alignment |
| UPC Polish | Low optical reflection |
| Factory Termination | Reduces field connector work |
| ODF Compatibility | Excellent |
| FDB Compatibility | Excellent |
| Patch Panel Use | Excellent |
| Telecommunications Use | Excellent |
Commercial 1x2 SC/UPC splitters are commonly supplied with yellow single-mode fibre and blue SC/UPC connectors.
SC/UPC vs SC/APC Splitter
| Feature | SC/UPC | SC/APC |
|---|---|---|
| Typical Connector Colour | Blue | Green |
| Polish Type | Ultra Physical Contact | Angled Physical Contact |
| Back Reflection | Low | Lower |
| Enterprise Networks | Very Common | Application dependent |
| FTTH / PON | Used where UPC specified | Very Common |
| CATV | Less preferred | Excellent |
| Direct UPC/APC Mating | No | No |
Always match the connector polish to the installed adapter, ODF, ONT or patch cord.
Typical Optical Performance
| Optical Parameter | Typical / Representative Value |
|---|---|
| Configuration | 1x2 |
| Operating Wavelength | 1260–1650 nm |
| Typical Insertion Loss | ≤3.9–4.2 dB |
| Uniformity | ≤0.4–0.6 dB |
| PDL | ≤0.2 dB |
| Directivity | ≥55 dB |
| Fibre Mode | Single Mode |
| Connector Type | SC/UPC |
A commercial SC/UPC 1x2 PLC splitter specifies ≤4.2 dB insertion loss, while another product family specifies ≤3.8 dB for a 1x2 PLC splitter.
Why the 1260–1650 nm Range Matters
The broad operating wavelength range allows the splitter to work across several single-mode optical services.
| Wavelength | Typical Application |
|---|---|
| 1310 nm | Upstream transmission |
| 1490 nm | GPON downstream |
| 1550 nm | Optical video / additional services |
| 1577 nm | Newer PON systems |
| 1625 nm | Testing and monitoring |
Professional PLC splitter specifications commonly cover 1260–1650 nm, making them suitable for access and telecommunications networks.
Typical Fibre Construction
| Fibre Feature | Typical Description |
|---|---|
| Fibre Mode | Single Mode |
| Typical Fibre Type | G.657A1 / G.652D |
| Typical Core / Cladding | 9/125 µm |
| Typical Jacket Colour | Yellow |
| Typical Length | 1 m / 1.5 m |
| Connector Type | SC/UPC |
| Connector Colour | Blue |
| Bend-Insensitive Fibre | Common on modern versions |
A current SC/UPC 1x2 PLC splitter product uses single-mode fibre with 1 m cable leads, while other 1x2 PLC splitter products use G.657A1 or G.652D fibre.
1x2 PLC Splitter vs Bare 1x2 PLC Splitter
| Feature | SC/UPC Connectorized 1x2 | Bare 1x2 |
|---|---|---|
| Factory Connectors | Yes | No |
| Plug-and-Play | Yes | No |
| Fusion Splicing Required | Usually Not | Usually Yes |
| Installation Speed | Faster | More involved |
| Termination Flexibility | Lower | Higher |
| ODF Installation | Excellent | Excellent |
| FDB Installation | Excellent | Excellent |
| Connector Loss | Included | Added after termination |
Choose the connectorized version when fast installation and easy replacement are priorities.
1x2 vs 1x4 vs 1x8 PLC Splitter
| Feature | 1x2 | 1x4 | 1x8 |
|---|---|---|---|
| Outputs | 2 | 4 | 8 |
| Ideal Power per Output | 50% | 25% | 12.5% |
| Theoretical Split Loss | ~3.0 dB | ~6.0 dB | ~9.0 dB |
| Typical Practical Loss | ~4 dB | ~7 dB | ~10 dB |
| Subscriber Capacity | 2 | 4 | 8 |
| Optical Budget Requirement | Lowest | Moderate | Higher |
| Small Branch Networks | Excellent | Excellent | Excellent |
A 1x2 splitter preserves more optical power per output than higher split ratios.
1x2 PLC Splitter vs FBT Splitter
| Feature | PLC 1x2 | FBT 1x2 |
|---|---|---|
| Technology | Planar Lightwave Circuit | Fused Biconical Taper |
| Wide Wavelength Performance | Excellent | More application dependent |
| Channel Uniformity | Excellent | Good |
| Scalability | Excellent | Lower for large ratios |
| Compactness | Excellent | Excellent |
| FTTH / GPON | Very Common | Also Used |
For modern PON deployments, PLC technology is widely preferred because of its broad wavelength range and consistent output distribution.
Key Benefits of 1x2 Splitter with SC/UPC Connectors
Plug-and-Play Connectivity
Factory-installed SC/UPC connectors reduce field termination work.
Balanced Two-Way Distribution
One incoming optical signal can be split into two downstream branches.
Wide Operating Wavelength
Professional models support 1260–1650 nm.
Low Insertion Loss
Representative products specify approximately 3.8–4.2 dB insertion loss.
Low PDL
Typical professional models specify around ≤0.2 dB polarization-dependent loss.
No Electrical Power
The splitter operates passively without power supplies or configuration.
Easy Maintenance
SC/UPC connectors allow quick disconnection, cleaning and replacement.
Watch 1x2 Splitter with SC/UPC Connectors
Watch on YouTube: https://youtu.be/AbC08ccei_s
The 1x2 Splitter with SC/UPC Connectors provides a convenient way to divide one optical signal into two fibre paths without requiring field connector termination. The factory-installed blue SC/UPC connectors make the splitter easy to integrate into compatible ODFs, fibre distribution boxes, patch panels and network equipment. Commercial versions are available with single-mode fibre and cable lengths around 1 m or 1.5 m.
PLC technology provides stable optical distribution across a wide wavelength range. Representative 1x2 splitter specifications cover 1260–1650 nm with insertion loss around 3.9–4.2 dB and low polarization-dependent loss. These characteristics make the splitter suitable for GPON, EPON, FTTH and general fibre distribution where one feeder path needs to branch into two downstream links.
The connectorized design is especially valuable for installers who want faster deployment and easier maintenance compared with bare fibre splitters. Fiber Optics Kenya can supply the 1x2 Splitter with SC/UPC Connectors alongside SC/UPC adapters, patch cords, pigtails, FDB/FAT boxes, ODFs, optical power meters and fibre-cleaning tools, providing a complete solution for professional fibre distribution.
Applications of 1x2 Splitter with SC/UPC Connectors
1. FTTH Networks
Split one optical feeder into two subscriber or distribution paths.
2. GPON Networks
Provide passive one-to-two optical distribution between OLT and downstream network branches.
3. EPON Networks
Divide optical signals without powered switching equipment.
4. Fibre Distribution Boxes
Connect the splitter directly into compatible SC/UPC adapters.
5. Optical Distribution Frames
Provide convenient connectorized splitting inside ODF systems.
6. Fibre Patch Panels
Create two downstream optical links from one incoming fibre.
7. Telecommunications Networks
Support passive optical signal branching.
8. CCTV Fibre Networks
Divide compatible optical links between two destinations.
9. Enterprise Fibre Networks
Create simple two-way optical distribution within structured cabling systems.
10. Fibre Testing
Split one optical source into two test paths.
Typical FTTH Connection
| Network Stage | Typical Component |
|---|---|
| Provider Equipment | OLT |
| Incoming Fibre | Single Mode |
| Splitter Input | SC/UPC |
| Optical Splitter | 1x2 PLC Splitter |
| Output 1 | SC/UPC |
| Output 2 | SC/UPC |
| Distribution Network | Single Mode Fibre |
| Subscriber Equipment | Compatible ONT / ONU |
Installation Considerations
| Installation Factor | Recommendation |
|---|---|
| Connector Type | Match SC/UPC interfaces |
| Connector Cleaning | Clean before mating |
| Optical Budget | Include splitter loss |
| Bend Radius | Avoid tight bends |
| Cable Management | Route fibre neatly |
| Adapter Compatibility | Use SC/UPC adapters |
| Testing | Measure power on both outputs |
| Unused Connectors | Keep capped and protected |
Recommended Accessories
| Accessory | Purpose |
|---|---|
| SC/UPC Adapter | Couples SC/UPC connectors |
| SC/UPC Patch Cord | Connects splitter to equipment |
| SC/UPC Pigtail | Fibre termination |
| FDB / FAT Box | Houses fibre distribution |
| Optical Distribution Frame | Structured fibre management |
| Fibre Patch Panel | Provides organized connection points |
| Optical Power Meter | Measures output optical power |
| Visual Fault Locator | Helps trace fibre links |
| Connector Cleaner | Cleans SC/UPC ferrules |
| OTDR | Tests completed fibre network |
Why Buy 1x2 Splitter with SC/UPC Connectors from Fiber Optics Kenya?
| Why Choose Fiber Optics Kenya? | Customer Benefit |
|---|---|
| 1x2 PLC Splitters | Reliable two-way optical distribution |
| SC/UPC Connector Options | Faster plug-and-play installation |
| Single-Mode Fibre | Suitable for FTTH and telecom |
| SC/UPC Adapters | Matching accessories available |
| Patch Cords & Pigtails | Complete fibre connection solutions |
| FDB & FAT Boxes | Complete subscriber distribution |
| ODFs & Patch Panels | Professional fibre management |
| Testing Equipment | Verify fibre performance |
| Technical Guidance | Help selecting compatible components |
| Bulk Supply | Suitable for ISPs and contractors |
| Competitive Pricing | Cost-effective fibre procurement |
| Nationwide Delivery | Supply throughout Kenya |
Frequently Asked Questions
What is a 1x2 Splitter with SC/UPC Connectors?
It is a passive optical splitter with one input and two outputs, all terminated with compatible SC/UPC fibre connectors. Commercial versions are readily available.
What does 1x2 mean?
It means one optical input is divided into two optical outputs.
What colour are SC/UPC connectors?
SC/UPC connectors are commonly blue.
What does UPC mean?
UPC means Ultra Physical Contact.
Is this splitter single mode?
Most SC/UPC 1x2 PLC splitters for FTTH and telecom applications are designed for single-mode fibre.
What fibre types are used?
Representative models use G.657A1 or G.652D single-mode fibre.
What is the typical operating wavelength?
Professional PLC splitters commonly operate from 1260 nm to 1650 nm.
What is the typical insertion loss?
Representative 1x2 products specify around 3.8–4.2 dB.
What is the typical PDL?
Representative products specify around ≤0.2 dB PDL.
Does the splitter require electricity?
No. It is completely passive.
Does it require fusion splicing?
Not normally if all required SC/UPC connectors are already factory installed.
Is it suitable for FTTH?
Yes. SC/UPC 1x2 splitters can be used in FTTH systems where UPC interfaces are specified.
Can it be used in GPON?
Yes. PLC splitters are widely used in GPON optical distribution networks.
Can it be used in EPON?
Yes. 1x2 PLC splitters are suitable for GPON and EPON access networks.
Can one splitter serve two subscribers?
Potentially yes, provided each output is allocated to a subscriber and the optical budget supports both links.
Can it be installed inside an FDB?
Yes. Compact 1x2 SC/UPC splitters can be installed inside suitable fibre distribution boxes.
Can it be installed inside an ODF?
Yes. Connectorized PLC splitters can be integrated into compatible ODFs and patch panels.
Can SC/UPC connect directly to SC/APC?
No. UPC and APC connector end-face geometries differ and should not be directly mated.
What is the difference between this and a bare 1x2 splitter?
A bare splitter has unconnectorized fibre leads and normally requires fusion splicing, while this version has SC/UPC connectors already installed.
What is the difference between 1x2 and 1x4?
A 1x2 has two outputs with lower optical loss, while a 1x4 has four outputs but divides the available optical power further.
Are different cable lengths available?
Yes. Representative products are available with 1 m and 1.5 m fibre leads, while custom lengths may also be offered.
Do you supply SC/UPC adapters?
Yes. Fiber Optics Kenya can supply compatible SC/UPC adapters.
Do you supply SC/UPC patch cords?
Yes. Matching single-mode SC/UPC patch cords can be supplied.
Do you supply FDB and FAT boxes?
Yes. Compatible fibre distribution boxes and access terminals can be supplied.
Do you supply optical power meters?
Yes. Fibre testing equipment can be supplied for installation and maintenance.
Do you provide fibre installation and testing?
Yes. Professional fibre installation, termination and optical testing support is available.
Do you deliver outside Nairobi?
Yes. Fiber Optics Kenya supplies fibre optic products and accessories throughout Kenya.
Contact Fiber Optics Kenya
Fiber Optics Kenya
Lyric House
7th Floor Room S9
Kimathi Street
Nairobi
Phone: +254 704 991 492
Email: info@fibreopticskenya.co.ke
The 1x2 Splitter with SC/UPC Connectors provides a simple, plug-and-play way to divide one single-mode optical signal into two reliable fibre branches.
Contact Fiber Optics Kenya for competitive pricing, SC/UPC PLC splitters, compatible fibre accessories, bulk orders and nationwide delivery across Kenya.